Houzz Logo Print
webuser_421571078

Kitchen cabinet coming apart

KS S1
il y a 5 ans

Hi,

I was hoping someone can help me with some feedback on what to do with a kitchen cabinet that is coming apart. The back is firmly screwed to the wall, but the sides/front are pulling away. Can this be fixed or am I going to need to replace the cabinet?


Here's different views of the cabinet with issue.






Appreciate the help.

Commentaires (10)

  • sandk
    il y a 5 ans
    I have a similar problem and after digging a bit, discovered the problem was likely related to it being hung as a single cabinet. My cabinets are Kraftmaid, and in the installation instructions it states that their cabinets should not be installed like that. They need either cabinets adjacent or to be screwed to something above (ceiling, soffit, another cab) or be supported by brackets. My cabinets have particle board construction and I don’t know that I would trust a repair. Even with a new cabinet, the same thing would probably happen if that applies to yours. Hopefully someone has a good solution.
  • wdccruise
    il y a 5 ans

    I wouldn't attempt to salvage the cabinet which is clearly coming unglued and could come crashing down if you put something heavy in it. You might consider replacing it with an Ikea cabinet (example) which hangs from a suspension rail attached to the wall.

  • PRO
    Hankins & Associates, Inc. - Kitchens and Baths
    il y a 5 ans
    Remove the cabinet from the wall. Re-make/Re-install hang rails (top and bottom). Believe it or not, some cabinet manufacturers rely of staples alone (no wood glue) to hold their cabinets together.
  • User
    il y a 5 ans

    What brand of import ish is that?

  • KS S1
    Auteur d'origine
    il y a 5 ans

    No idea. They are probably 16-18 years old, at this point

  • artistsharonva
    il y a 5 ans

    I would get a new cabinet.


    However,


    If want to salvage. Hankins suggestion of taking it down then wood gluing with clamps. A corner stapler costs, but it would be good to re-staple as well. Maybe you can rent or borrow. or use metal L brackets inside every 6" or so. Not as attractive as staples inside, but functional. Pre-drill before screwing. Use screws not as deep as panel or you'll go through. Looks like particle board which can easily damage & fall apart. Then rehang.




  • PRO
    Hankins & Associates, Inc. - Kitchens and Baths
    il y a 5 ans
    To be clear... I'd advocate new quality cabinets, carcasses made of plywood. But if the homeowner isn't ready to take the $$$ plunge... then repair is an option. As someone else mentioned, unless the walls are perfectly plumb (unlikely), the installer should've used shims. Simply screwing a cabinet to the wall, twisting and racking it, is a sure fire way to compromise its joinery. Especially if not made well in the first place.
  • Utilisateur Houzz - 962696928
    il y a 3 ans

    I have the same problem but my cabinet were hung together. my were shrock cabinets . They have a warranty on them but only for the original purchaser.

  • PRO
    Joseph Corlett, LLC
    il y a 3 ans

    This is installer error, not the fault of the cabinet or its quality. You bring the wall to the cabinet with shims, you do not take the cabinet to the wall with screws. This cabinet is self-destructing because it was "racked" or pulled out of square by a clueless installer.

Sponsorisé

Rechargez la page pour ne plus voir cette annonce spécifique

France
Personnaliser mon expérience à l'aide de cookies

Houzz utilise des cookies et d'autres technologies de suivi similaires pour personnaliser mon expérience utilisateur, me proposer du contenu pertinent et améliorer ses produits et services. En cliquant sur « Accepter », j'accepte l'utilisation des cookies telle qu'elle est décrite plus en détail dans la Politique d'Utilisation des Cookies de Houzz. Je peux rejeter les cookies non essentiels en cliquant sur « Tout rejeter » ou « Gérer mes préférences ».